Section 1677 (Starting System): Specifications
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Normal engine cranking speed | 200-250 rpm |
| Starting circuit maximum voltage drop (engine at normal operating temperature) | 0.5 volt |
| Starter motor maximum load current draw | 800 amps |
| Starter motor no-load current draw | 60-80 amps |
| Starter motor normal load current draw | 130-190 amps |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Ground wire nut - 2.5L | 18 | - | 159 |
| Ground wire nut - 3.0L | 18 | - | 159 |
| Starter motor bolt and stud bolt (2.5L) | 25 | 18 | - |
| Starter motor bolts (3.5L) | 27 | 20 | - |
| Starter motor solenoid battery cable nut | 12 | - | 106 |
| Starter motor solenoid wire nut | 5 | - | 44 |
| Starter motor stud bolts (3.0L) | 27 | 20 | - |