General Specifications
WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Description | mm | in |
|---|---|---|
| Clearance, Tolerance and Adjustments | ||
| Maximum differential case runout | 0.076 | 0.003 |
| Maximum pinion stem radial runout in assembly | 0.25 | 0.010 |
| Backlash between ring gear teeth and pinion teeth | 0.127-0.228 | 0.005-0.009 |
| Maximum backlash variation between teeth | 0.076 | 0.003 |
| Available drive pinion bearing adjustment shim in steps of: 0.0254 mm (0.001 inch) 8.0 inch axle | 0.254-0.965 | 0.010-0.038 |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Lubricants/Sealants | |
| Premium Long-Life Grease XG-1-C or XG-1-K (Canada CXG-1-C) | ESA-M1C75-B |
| Threadlock 262 TA-26 | WSK-M2G351-A6 |
| Motorcraft SAE 75W-140 High Performance Rear Axle Lubricant XY-75W-140-QL | WSL-M2C192-A |
| Clear Silicone Rubber TA-32 | ESB-M4G92-A |
| Silicone Gasket and Sealant TA-30 | WSE-M4G323-A4 |
| Stud and Bearing Mount TA-27 | WSK-M2G349-A1 |
| Pipe Sealant with PTFE TA-24 | WSK-M2G350-A2 |