LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> ZX2 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 272 (Electronic Engine Controls) >> Removal And Installation >> Powertrain Control Module (PCM) >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Remove the cabin air filter plenum. For additional information, refer to AIR DISTRIBUTION & FILTERING .
  3. Remove the glove compartment.
  4. Disconnect the 3 powertrain control module (PCM) electrical connectors.
    • To install, tighten to 5 Nm (44 lb-in).
  5. Remove the 2 PCM nuts.
    • To install, tighten to 8 Nm (71 lb-in).
  6. Remove the 2 PCM bracket bolts.
    • To install, tighten to 7 Nm (62 lb-in).
  7. Remove the PCM and bracket as an assembly through the glove compartment opening.
  8. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals