Removal and Installation
WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Prior to removal of the module, it is necessary to upload audio unit configuration information to the diagnostic tool. This information needs to be downloaded into the new audio unit once installed. For additional information, refer MODULE CONFIGURATION
.
- Remove the instrument panel center finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
- Remove the 4 screws and the audio unit.
- Disconnect the electrical connectors and the antenna lead-in cable.
- To install, reverse the removal procedure.