Throttle Body: Installation
WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
- Install the TB and the 4 bolts. Tighten the bolts in 2 stages.
- Stage 1: Tighten to 9 Nm (80 lb-in).
- Stage 2: Rotate an additional 90 degrees.
- Connect the TAC and the TP sensor electrical connectors.
- Install the air cleaner outlet tube. For additional information, refer to INTAKE AIR DISTRIBUTION & FILTERING .
- Connect the negative battery cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
NOTE:
Install a new TB gasket.