Component Testing Procedure
WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
EXTERIOR REAR VIEW MIRROR SWITCH COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Left mirror | Selector switch Left | ||
| Up | 6 and 3 1 and 5 |
Up | Closed circuit |
| Down | 3 and 5 6 and 1 |
Down | Closed circuit |
| Left | 6 and 3 5 and 4 |
Left | Closed circuit |
| Right | 6 and 1 3 and 8 |
Right | Closed circuit |
| Right mirror | Selector switch Right | ||
| Up | 6 and 3 2 and 1 |
Up | Closed circuit |
| Down | 3 and 2 5 and 1 |
Down | Closed circuit |
| Left | 6 and 3 7 and 1 |
Left | Closed circuit |
| Right | 3 and 7 6 and 1 |
Right | Closed circuit |