Speed Control Switches: Installation
WARNING: This page is about a different car, the 2002 Ford RV Cutaway, 2002 Ford Econoline, 2002 Ford E450 Super Duty, and 2002 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Install switches. Connect air bag module wiring connector to air bag sliding contact. Position air bag module onto steering wheel. Install air bag module nuts and washers. Tighten nuts to 84-120 INCH lbs. (10-14 N.m). Activate air bag system. Observe AIR BAG warning light to verify system is functioning properly. See SYSTEM OPERATION CHECK in AIR BAG RESTRAINT SYSTEMS article in RESTRAINTS.