Front Disc Brake: Installation
WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
- Clean any rust or foreign material from brake disc and wheel hub.
- Use brake parts cleaner to clean the front brake disc and hub surfaces.
- Apply a thin coat of anti-seize lubricant to the hub flange.
- Install the brake disc.
- Install a new brake disc screw.
- Tighten to 12 N.m (9 lb-ft).
- Position the brake caliper and brake caliper anchor plate assembly and install 2 new bolts.
- Tighten to 100 N.m (74 lb-ft).