Climate Controlled Seat Module: Installation
WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- Install the dual climate controlled seat module (DCSM) to the seat.
- Position the DCSM to the electrical bracket and install 2 new rivets.
- Connect the 3 DCSM electrical connectors and locking wedges.
- Install the front seat and repower the SRS. Do not prove out the SRS at this time. For additional information, refer to SEAT - FRONT .
- Carry out the OCCUPANT CLASSIFICATION SENSOR (OCS) SYSTEM ZERO SEAT WEIGHT TEST and prove out the SRS.
- Install the DCSM software data. Carry out the appropriate steps in the PMI procedure. For additional information, refer to MODULE CONFIGURATION .