Speed Control Actuator: Removal

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Press the locking tab and rotate the speed control cable cap to remove.

Fig 1: Accelerator Cable Bracket Locking Tab

Courtesy of FORD MOTOR CO.

Disconnect the speed control cable from the speed control actuator pulley.
1. Gently push the retaining spring.
2. Disconnect the speed control cable slug from the speed control actuator pulley.

Fig 2: Speed Control Cable At Speed Control Actuator Pulley

Courtesy of FORD MOTOR CO.

Remove the 3 speed control actuator screws and the speed control actuator.
- Disconnect the electrical connector.