LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> ZX2 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 231 (Starting System) >> Component Tests >> Starter Relay
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Starter Relay

WARNING: This page is about a different car, the 2004 Lincoln LS, 2004 Ford Thunderbird, 2003 Lincoln LS, and 2003 Ford Thunderbird. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove starter relay from relay box. Check relay continuity. Continuity should exist between relay terminals No. 85 and 86, and between relay terminals No. 30 and 87a. See Fig 1 . Continuity should not exist between relay terminals No. 30 and 87. If continuity is as specified, go to next step. If continuity is not as specified, replace relay.
  2. Using a jumper wire, apply battery voltage to relay terminal No. 85. Using a second jumper wire, ground relay terminal No. 86. Continuity should now exist between relay terminals No. 30 and 87. If continuity is not as specified, replace relay. If continuity is as specified, relay is okay at this time.
Fig 1: Identifying Starter Relay Terminals
G97D28186Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals