LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> ZX2 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2808 (Interior Lighting System) >> Removal And Installation >> Ambient Lighting Module >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. If equipped with an automatic transaxle, remove the selector lever trim ring.
  2. If equipped with a manual transaxle, remove the gearshift knob.
  3. Open the storage compartment door.
  4. Pull the floor console finish panel straight up to release the retainer clips and remove the finish panel.
    • Disconnect the ambient lighting module electrical connector.
  5. Remove the 2 screws and the ambient lighting module.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals