Seat Control Switch: Installation

WARNING: This page is about a different car, the 2002 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.

Position the seat control switch. Install the screws.

Fig 1: Installing Seat Control Switch And Screws
Courtesy of FORD MOTOR CO.
Install the seat control switch knob.

Fig 2: Installing Seat Control Switch Knob
Courtesy of FORD MOTOR CO.
Position the outboard side shield.
1. Connect the power seat switch electrical connector.
2. Install the outboard side shield front retainer (not shown).
  
  Fig 3: Installing Outboard Side Shield
  Courtesy of FORD MOTOR CO.
Engage the outboard side shield retainers.
1. Lift the outboard side shield.
2. While holding the side shield up, rotate the side shield, engaging the retainers.
  
  Fig 4: Installing Outboard Side Shield Retainers
  Courtesy of FORD MOTOR CO.
Lift, push in and then down, engaging the side shield retainer.

Fig 5: Installing Side Shield Retainer
Courtesy of FORD MOTOR CO.
Install the outboard side shield screw.

Fig 6: Installing Outboard Side Shield Screw
Courtesy of FORD MOTOR CO.
Repower the SRS. Refer to ACTIVATING SYSTEM .