LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> ZX2 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 472 (Engine System-General Information) >> General Procedures >> Cylinder Head Distortion >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

WARNING: This page is about a different car, the 2004 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use a straight edge and a feeler gauge to inspect the cylinder head for flatness. If the cylinder head is distorted, install a new cylinder head.
    Fig 1: Inspecting Cylinder Head For Flatness Using straight edge and feeler gauge
    G03200325Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals