Section 536 (Engine Cooling)
WARNING: This page is about a different car, the 2004 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Description And Operation
- Diagnosis And Testing
- Engine Cooling
- Special Tool(s)
- Inspection and Verification
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: Loss Of Coolant
- Pinpoint Test B: The Engine Overheats
- Pinpoint Test C: The Engine Does Not Reach Normal Operating Temperature
- Pinpoint Test D: The Cooling Fan(S) Is Inoperative
- Pinpoint Test E: The Cooling Fans Are On At All Times
- Pinpoint Test F: The Cooling Fans Operate In One Speed Only
- Pinpoint Test G: The Run On Fan (ROF) Is Inoperative
- Component Tests
- Engine Cooling
- General Procedures
- Removal And Installation
- Thermostat - SVT
- Thermostat - 2.0L Zetec
- Thermostat - 2.0L SPI
- Thermostat Housing - SVT
- Thermostat Housing - 2.0L Zetec
- Thermostat Housing - 2.0L SPI
- Thermostat Housing - 2.3L
- Water Pump - 2.0L Zetec
- Water Pump Housing - 2.0L Zetec
- Water Pump - 2.0L SPI
- Water Pump - 2.3L
- Radiator - SVT
- Radiator
- Radiator - 2.3L
- Cooling Fan Motor And Shroud - 2.0L Engines
- Cooling Fan Motor And Shroud - 2.3L
- Run-On Fan Temperature Switch
- Coolant Expansion Tank
- Block Heater