Master Window/Door Lock Control Switch
Remove master window/door lock control switch. See REMOVAL & INSTALLATION . Check continuity between terminals (component side) as specified while operating switch. See MASTER WINDOW/DOOR LOCK CONTROL SWITCH TESTING table. See Figure . If continuity does not exist between specified terminals, replace master window/door lock control switch.
MASTER WINDOW/DOOR LOCK CONTROL SWITCH TESTING
| Switch Position | Continuity Between Terminals No. | |||
|---|---|---|---|---|
| All | (1) | |||
| Neutral | 6, 7, 8, 9, 12, 13, 14 & 15 | |||
| Left | ||||
| Up | 6 & 10 | |||
| Down | 10 & 13 | |||
| Right | ||||
| Up | 8 & 11 | |||
| Down | 11 & 15 | |||
|
||||