Accessory Delay Relay
- Remove accessory delay relay from central junction box. Central junction box is located behind left side of instrument panel. Check accessory delay relay continuity. Continuity should exist between relay terminals No. 85 and 86, and between terminals No. 30 and 87a. See Fig 1
. Continuity should not exist between relay terminals No. 30 and 87. If continuity is as specified, go to next step. If continuity is not as specified, replace accessory delay relay.
- Using a jumper wire, apply battery voltage to relay terminal No. 85. Using a second jumper wire, ground relay terminal No. 86. Continuity should now exist between relay terminals No. 30 and 87. If continuity is not as specified, replace accessory delay relay. If continuity is as specified, accessory delay relay is okay at this time.
Courtesy of FORD MOTOR CO.