LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2001 >> Excursion 5.4 L, RWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation - Gasoline >> Computerized Engine Controls >> Powertrain Control Module >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

  1. Disconnect negative battery cable.
  2. Remove any component(s) necessary to gain access to PCM. For PCM location, see PCM LOCATION  table.
  3. Loosen PCM connector retaining bolt (if equipped).
  4. Unplug harness connector from PCM.
  5. Remove 2 PCM mounting bolts.
  6. Remove PCM cover and PCM. On Excursion and F250/F350 Super Duty Pickup, removal of left front fender liner may be necessary to remove PCM connector.
  7. To install, reverse removal procedure.
  8. Tighten bracket bolts and connector bolt to specification. See TORQUE SPECIFICATIONS .
PCM LOCATION

Model Location
Econoline Left Side Of Engine Compartment, Near Master Cylinder
Excursion & F250/F350 Super Duty Pickup Behind Left Side Of Instrument Panel, Near Brake Pedal, Through Bulkhead
Escape, Expedition, Explorer, Explorer Sport, Explorer Sport Trac, Mountaineer, Navigator & Ranger Right Rear Of Engine Compartment, Mounted On Cowl
F150 Pickup Behind Right Kick Panel, Through Bulkhead
Villager Behind Glove Box
Windstar Right Rear Of Engine Compartment, Mounted On Cowl
scientia non olet · About LEMON Manuals