Key Programming - Spare Key Programming Switch

NOTE: Spare key programming switch is a programmable switch which provides the capability to enable/disable normal customer spare key programming procedure detailed in the owner's manual. This programmable switch is provided as a convenience for rental company fleets or other fleet purchasers who may not want the spare key programming procedure available to the vehicle driver. Spare key programming switch state can be viewed using PATS module SPARE_KY PID.

Insert a programmed ignition key into the ignition lock cylinder. Turn ignition switch to LOCK position, then to RUN position. Using NGS tester and Ford Service Function (FSF) card, select PATS module. Select SECURITY ACCESS PROCEDURE. This procedure will take 10 minutes to perform. After security access procedure has been completed, a new menu will be displayed with command options. Default setting on all new vehicles is ENABLE. Select SPARE KEY PROGRAMMING SWITCH. Set SPARE KEY PROGRAMMING SWITCH to ENABLE or DISABLE.