Power Window Master Switch
WARNING: This page is about a different car, the 2000 Mercury Mountaineer, 2000 Ford Explorer, 1999 Mercury Mountaineer, and 1999 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
Remove master window/door lock switch. See POWER WINDOW SWITCH under REMOVAL & INSTALLATION. Check for continuity between terminals as specified while operating switch. See appropriate MASTER SWITCH TESTING table. See Figure or Figure . If continuity does not exist as specified, replace switch.
MASTER SWITCH TESTING (4-DOOR MODELS)
| Switch Position | Continuity Between Terminals No. | |
|---|---|---|
| Neutral | 8, 9, 10, 11, 13, 15, 16, 17 & 18 | |
| Left Front | ||
| Up | 8 & 19 | |
| Down | 10 & 19 | |
| Right Front | ||
| Up | 9 & 19 | |
| Down | 11 & 19 | |
| Left Rear | ||
| Up | 15 & 19 | |
| Down | 17 & 19 | |
| Right Rear | ||
| Up | 16 & 19 | |
| Down | 18 & 19 | |
| Lockout Unlocked | 19 & 20 | |
| Switch Illumination | 1 & 5; 12 & 14 | |
MASTER SWITCH TESTING (2-DOOR MODELS)
| Switch Position | Continuity Between Terminals No. | |
|---|---|---|
| Neutral | 1, 5, 9 & 11; 2, 4, 8 & 12 | |
| Left | ||
| Up | 3 & 5 | |
| Down | 1 & 3 | |
| Right | ||
| Up | 10 & 12 | |
| Down | 8 & 10 | |
| Switch Illumination | 6 & 7; 13 & 14 | |