Power Window Single Switch
WARNING: This page is about a different car, the 2000 Mercury Mountaineer, 2000 Ford Explorer, 1999 Mercury Mountaineer, and 1999 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
Remove suspect window switch. See POWER WINDOW SWITCH under REMOVAL & INSTALLATION. Check for continuity between terminals as specified while operating switch. See appropriate SWITCH TESTING table. If continuity does not exist as specified, replace switch. See Fig 1 or Fig 2 .
SWITCH TESTING (RIGHT FRONT & RIGHT REAR)
| Switch Position | Continuity Between Terminals No. |
|---|---|
| Neutral | 1 & 2; 5 & 6 |
| Up | 2 & 4 |
| Down | 4 & 5 |
| Switch Illumination | 3 & 7 |
SWITCH TESTING (LEFT REAR)
| Switch Position | Continuity Between Terminals No. |
|---|---|
| Neutral | 1 & 5; 2 & 6 |
| Up | 4 & 5 |
| Down | 2 & 4 |
| Switch Illumination | 3 & 7 |