Passenger's Power Window Control Switch
Remove power window control switch. See POWER WINDOW CONTROL SWITCH under REMOVAL & INSTALLATION. Check continuity between specified terminals at appropriate connector with switch in specified position. See PASSENGER'S POWER WINDOW CONTROL SWITCH TESTING table. See Fig 1 . If continuity does not exist as specified, replace switch and retest system operation.
PASSENGER'S POWER WINDOW CONTROL SWITCH TESTING
| Test Between Terminal No. | Switch Position | Continuity |
|---|---|---|
| 1 & 2 | Neutral | No |
| " | Up | Yes |
| " | Down | No |
| 1 & 6 | Neutral | Yes |
| " | Up | No |
| " | Down | Yes |
| 2 & 7 | Neutral | No |
| " | Up | Yes |
| " | Down | Yes |
| 3 & 7 | Neutral | Yes |
| " | Up | Yes |
| " | Down | No |