| Tappet Bore | Diameter | | 22.230 - 22.268 Millimeter (mm) |
| Camshaft Bore | Inside Diameter | No. 1 | 54.688 - 54.713 Millimeter (mm) |
| | No. 2 | 54.188 - 54.213 Millimeter (mm) |
| | No.3 | 54.188 - 54.213 Millimeter (mm) |
| | No.4 | 54.688 - 54.713 Millimeter (mm) |
| Cylinder Head Gasket Surface | Flatness | Over 152 mm Distance | 0.08 Millimeter (mm) |
| Surface Finish | RMS | 1.0 - 3.3 Micro-Meters (micro-m) |
| Cylinder Bore | Diameter | | 89.00 Millimeter (mm) |
| Surface Finish | RMS | 0.45 - 0.96 Micro-Meters (micro-m) |
| Out Of Round | Limit | 0.025 Millimeter (mm) |
| | Service Limit | 0.050 Millimeter (mm) |
| Taper | Service Limit | 0.050 Millimeter (mm) |
| Main Bearing Bore | Diameter | | 68.905 Millimeter (mm) |
| Crankshaft | Main Bearing Cap | Bolts | Refer to Procedure |