LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2001 >> Windstar Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft Systems - Passive >> Programming >> Spare Key Programming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Spare Key Programming

NOTE: This procedure is used when customer needs extra keys programmed, without erasing stored codes, and 2 programmed keys are not available, but system has 2 ignition keys programmed. A maximum of 8 keys can be programmed. If 8 keys are already programmed, this procedure will not allow any more keys to be programmed. Number of programmed keys can be determined by accessing Virtual Image Cluster (VIC) PID NUMKEYS with New Generation Star (NGS) tester.

Insert unprogrammed key in ignition and turn ignition switch to ON position. Connect New Generation Star (NGS) tester to Data Link Connector (DLC). Insert Ford Service Function (FSF) card in NGS tester. Perform security access procedure. See SECURITY ACCESS PROCEDURE  . Select IGNITION KEY CODE PROGRAM. Turn ignition switch to OFF position. Disconnect NGS tester. Key should now be programmed and be able to start vehicle.

scientia non olet · About LEMON Manuals