LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2001 >> Windstar Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft Systems - Passive >> Programming >> Spare Key Programming Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Spare Key Programming Switch

NOTE: Spare key programming switch is a programmable switch which provides capability to enable/disable normal customer spare key programming procedure detailed in owner's manual. This programmable switch is provided as a convenience for rental company fleets or other fleet purchasers who may not want spare key programming procedure available to vehicle driver. Spare key programming switch state can be viewed using Virtual Image Cluster (VIC) PID SPARE_KY. Default setting on all new vehicles is ENABLE.

Insert a programmed ignition key into ignition lock cylinder. Insert Ford Service Function (FSF) card into New Generation Star (NGS) tester. Turn ignition switch from OFF to ON position. With NGS tester connected to vehicle, enter PCM then select SECURITY ACCESS PROCEDURE. This procedure will take 10 minutes to perform. After security access procedure has been completed, a new menu will be displayed with command options. Default setting on all new vehicles is ENABLE. Select SPARE KEY PROGRAMMING SWITCH. Set SPARE KEY PROGRAMMING SWITCH to ENABLE to allow keys to be programmed or DISABLE to make key programming not accessible.

scientia non olet · About LEMON Manuals