Description & Operation

The 6-way power seats provide horizontal and tilt adjustments. System consists of seat control switch, seat regulator motor, vertical and horizontal screw drives and gear mechanism, housing assembly and related wiring. Seat control switches are mounted on side of seat trim panel. Power seat circuits are protected by fuses located in battery junction box and circuit breakers located on seat track/motor assembly. Some models are equipped with front seat lumbar support system, and side air bag system. A Side Air Bag Simulator (418-133) is used when servicing power seats.

Horizontal movement is controlled by a transmission, lead screw and motor attached to the movable section of track. In tilt operation, armatures move front or rear vertical drive screws to adjust seat. Seat track/motor assembly is serviced as a unit.