LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2001 >> Windstar Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 1740 (Climate Control) >> Removal And Installation >> Function Selector Switch >> Removal And Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the climate control assembly. For additional information, refer to Climate Control Assembly .
  2. Remove the function selector switch knob.
  3. Remove the function selector switch.
    1. Remove the screw.
    2. Remove the function selector switch.
    4. Fig 1: Function Selector Switch & Screw
    GF0012730Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals