Control Assembly: Removal

WARNING: This page is about a different car, the 2003 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: The slider knobs are illuminated using a LEDs. Use care not to damage them when removing the slider knobs.

Disconnect the battery.
Remove the ash receptacle.

Fig 1: Removing Ash Receptacle
Courtesy of FORD MOTOR CO.
Remove the audio unit. For additional information, refer to AUDIO .
Remove the screws.

Fig 2: Removing Screws
Courtesy of FORD MOTOR CO.
Unsnap the panel.

Fig 3: Unsnapping Panel
Courtesy of FORD MOTOR CO.
Disconnect the connectors.

Fig 4: Disconnecting Connectors
Courtesy of FORD MOTOR CO.
Remove the control assembly.
- Remove the screws.
  
  Fig 5: Removing Control Assembly
  Courtesy of FORD MOTOR CO.