Specifications Index
ESCORT & ZX2 SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Axle Nut/Hub Nut | |||
| Front | 174-235 Ft. Lbs. (235-319 N.m) | ||
| Brakes | |||
| Bleeding Sequence | BLEEDING BRAKE SYSTEM | ||
| Disc Brakes | DISC BRAKE SPECIFICATIONS | ||
| Drum Brakes | DRUM BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Charging | |||
| Generator | ON-VEHICLE TESTING | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Drive Belts | |||
| Adjustment | BELT ADJUSTMENT | ||
| Belt Routing | DRIVE BELT ROUTING | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | 16 Lbs. | ||
| Thermostat R & I | |||
| 2.0L SOHC (VIN P) | THERMOSTAT | ||
| Water Pump | |||
| 2.0L DOHC (VIN 3) | WATER PUMP | ||
| 2.0L SOHC (VIN P) | WATER PUMP | ||
| Engine Mechanical | |||
| 2.0L DOHC (VIN 3) | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | With engine at normal operating temperature, oil pressure should be 54-80 psi (3.8-5.6 kg/cm2 ) at 4000 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| 2.0L SOHC (VIN P) | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | With engine at normal operating temperature, oil pressure should be 35-65 psi (2.5-4.6 kg/cm2 ) at 2000 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab.From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate Torque | |||
| 2.0L DOHC (VIN 3) | 75-85 Ft. Lbs (107-115 N.m) | ||
| 2.0L SOHC (VIN P) | 54-67 Ft. Lbs. (73-91 N.m) | ||
| Fuel System | |||
| Fuel Filter Location | Located in rear engine compartment, mounted in bracket. | ||
| 2.0L DOHC (VIN 3) | |||
| Pressure Release Procedure | FUEL PRESSURE RELEASE & FUEL LINE CONNECTIONS | ||
| Pressure Specification | 35-65 psi (240-448 kPa) | ||
| Fuel Pressure Test Procedure | FUEL PRESSURE | ||
| 2.0L SOHC (VIN P) | |||
| Pressure Release Procedure | FUEL PRESSURE RELEASE & FUEL LINE CONNECTIONS | ||
| Pressure Specification | 35-65 psi (240-448 kPa) | ||
| Fuel Pressure Test Procedure | FUEL PRESSURE | ||
| Fuel Filter R & I | REMOVAL & INSTALLATION (ESCORT& ZX2)) | ||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Ignition Wires (Resistance) | HIGH TENSION WIRE RESISTANCE | ||
| Ignition Wires (Routing) | FIRING ORDER & TIMING MARKS | ||
| Spark Plugs | |||
| 2.0L DOHC (VIN 3) | |||
| Type | Motorcraft AZFS-32FE | ||
| Gap | .044 In. (1.1 mm) | ||
| Torque | 7-15 (9-20 N.m) | ||
| 2.0L SOHC (VIN P) | |||
| Type | Motorcraft AGSF-34EE | ||
| Gap | .052-.056 In. (1.30-1.40 mm) | ||
| Torque | 7-15 (9-20 N.m) | ||
| Starting | |||
| Starter | STARTER MOTOR SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 74-100 Ft. Lbs. (100-136 N.m) | ||