Front Brake Caliper: Assembly
WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- Lubricate each cylinder bore, the piston seals, brake caliper pistons, and the dust boots with brake fluid.
- Install the brake caliper piston seals.
- Install the dust boots.
- Install the brake caliper piston.
- Install the bleeder screw and bleeder screw cap.
- Tighten to 20 Nm (15 lb-ft).
- Install the brake caliper. For additional information, refer to BRAKE CALIPER .