Rear Wheel Speed Sensor: Removal

WARNING: This page is about a different car, the 2003 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

Loosen the wheel nuts.
Raise and support the vehicle. For additional information, refer to JACKING & HOISTING .
Remove the wheel.
Remove the wheel speed sensor.

Fig 1: Removing Wheel Speed Sensor
Courtesy of FORD MOTOR CO.
Disconnect the wheel speed sensor wiring harness.
1. Disconnect the electrical connector.
2. Detach the clips.
  
  Fig 2: Disconnecting Wheel Speed Sensor Wiring Harness
  Courtesy of FORD MOTOR CO.