General Specifications

Item	Specification
First Gear and Differential Gear mm (in)	0.05-0.33 (0.002-0.013)
Second Gear and Secondary Third Gear mm (in)	0.18-0.51 (0.007-0.020)
Second Gear and Third Gear mm (in)	0.05-0.25 (0.002-0.010)
Fourth Gear and Bearing Cone mm (in)	0.17-0.42 (0.007-0.017)
Clearance
Synchronizer Blocking Ping to Gear mm (in)	0.8-1.5 (0.031-0.059)
First/Second Synchronizer to Shift Fork mm (in)	0.1-0.95 (0.004-0.037)
Third/Forth Synchronizer to Shift Fork mm (in)	0.1-0.9 (0.004-0.035)
Fifth/Reverse Synchronizer to Shift Fork mm (in)	0.1-0.86 (0.004-0.034)
End Play
Input Shaft mm (in)	0-0.05 (0-0.002)
Output Shaft mm (in)	0-0.05 (0-0.002)
Runout
Input Shaft Gear mm (in)	0.05 (0.002)
Output Shaft Gear mm (in)	0.015 (0.0006)
Backlash
Side Gears and Pinions mm (in)	0.025-0.1 (0.001-0.004)
Lubricants and Sealants
Motorcraft MERCON Multi-Purpose (ATF) Transmission Fluid XT-2-QDX	MERCON®
Alternative Transaxle Fluid - SAE75W90 Gear Oil F32Z-19C547-MA	APIGL-4
Premium Long life Grease XG-1-C or -K	ESA-M1C75-B
Silicone Gasket and Sealant F6AZ-19562-AA	WSE-M4G323-A6