Driver's Power Window Control Switch (2-Door)
WARNING: This page is about a different car, the 2002 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
Remove power window control switch. See POWER WINDOW CONTROL SWITCH under REMOVAL & INSTALLATION.
Check continuity between specified terminals at appropriate connector with switch in specified position. See DRIVER'S POWER WINDOW CONTROL SWITCH TESTING (2-DOOR) table. See Fig 1. If continuity does not exist as specified, replace switch and retest system operation.
NOTE:
Testing for left power window switch in down position is not available from manufacturer.
DRIVER'S POWER WINDOW CONTROL SWITCH TESTING (2-DOOR)
| Test Between Terminals No. | Switch Position | Continuity | |
|---|---|---|---|
| Left Front Power Window Switch | |||
| 1 & 8 | Neutral | Yes | |
| 1 & 8 | Up | No | |
| 8 & 10 | Neutral | No | |
| 8 & 10 | Up | Yes | |
| Right Front Power Window Switch | |||
| 1 & 3 | Neutral | Yes | |
| 1 & 3 | Up | Yes | |
| 1 & 3 | Down | No | |
| 1 & 5 | Neutral | Yes | |
| 1 & 5 | Up | No | |
| 1 & 5 | Down | Yes | |
| 3 & 10 | Neutral | No | |
| 3 & 10 | Up | No | |
| 3 & 10 | Down | Yes | |
| 5 & 10 | Neutral | No | |
| 5 & 10 | Up | Yes | |
| 5 & 10 | Down | No | |