Removal & Installation (Front)

Remove door trim panel. See DOOR TRIM PANEL under REMOVAL & INSTALLATION in POWER DOOR LOCKS & REMOTE KEYLESS ENTRY SYSTEMS - FOCUS article. Remove 2 bolts and remove side impact bolster. Remove speaker from door panel and disconnect electrical connector. Disconnect interior door handle and position aside. Remove moisture barrier. Remove one-touch down relay, if equipped, and position aside. Reconnect power window control switch. Lower window enough to line up glass retaining bolts with access holes. Remove 2 glass retaining bolts. Hold glass at the top of the window opening and lower regulator completely. Tilt glass toward front of vehicle and slide out through window opening. To install, reverse removal procedure.