Direct Clutch: Disassembly

Remove the direct clutch pressure, friction and steel plates.
1. Remove the retaining ring.
2. Remove the plates.
  
  Fig 1: Removing Direct Clutch Pressure, Friction And Steel Plates
  Courtesy of FORD MOTOR CO.
Using the special tool, remove the selective snap ring.

Fig 2: Removing Selective Snap Ring
Courtesy of FORD MOTOR CO.
Remove the direct clutch balance piston.

Fig 3: Removing Direct Clutch Balance Piston
Courtesy of FORD MOTOR CO.
Remove the direct clutch return spring.

Fig 4: Removing Direct Clutch Return Spring
Courtesy of FORD MOTOR CO.

CAUTION: If damage is found on the direct clutch piston seals, install a new direct clutch piston.

Fig 5: Removing And Inspecting Direct Clutch Piston

Courtesy of FORD MOTOR CO.