Programming Without Using 2 Programmed Keys

NOTE: This procedure is used when customer needs extra keys programmed and 2 programmed keys are not available but system has 2 ignition keys programmed. A maximum of 8 keys can be programmed. If 8 keys are already programmed, this procedure will not allow any more to be programmed. The number of programmed key can be determined by accessing PCM PID NUMKEYS with New Generation Star (NGS) tester.

Insert unprogrammed key in ignition and turn ignition switch to RUN position. Connect NGS tester to DLC. Perform security access procedure. See SECURITY ACCESS . Select IGNITION KEY CODE PROGRAM. Turn ignition switch to OFF position and disconnect NGS tester. Key should now be programmed and be able to start vehicle.