LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Taurus SES, 3.0 2, AX4S >> Repair and Diagnosis >> General Information >> Engine >> Engine System General Information >> General Procedures >> Connecting Rod - Bend
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Connecting Rod - Bend

  1. Measure the connecting rod bend on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the bend measurement is within specification.
    • If out of specification, install new components as necessary.
    Fig 1: Measuring Connecting Rod Bend
    G02156264Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals