Checking Procedure

To calculate ride height, measure and record dimension "C". See Fig 1 and Fig 2 . See RIDE HEIGHT SPECIFICATIONS table. If ride height does not meet specification, and no unusual load is present, check for damaged components or non-standard replacement suspension components.

Fig 1: Front Ride Height Measurement

Courtesy of FORD MOTOR CO.

Fig 2: Rear Ride Height Measurement

Courtesy of FORD MOTOR CO.

RIDE HEIGHT SPECIFICATIONS

Application

⁽¹⁾ In. (mm)

Front

2.1-2.7 (54-70)

Rear

0.6-1.2 (16-32)

⁽¹⁾	See procedures for measurement calculations/points.