Anti-Lock Brake System -Traction Control & Stability Assist
- Specifications
- Description And Operation
- Diagnosis And Testing
- Anti-Lock Control - Traction Control and Stability Assist
- Notes
- Special Tool(s)
- Principles of Operation
- Low Tire Warning (LTW) System
- Inspection and Verification
- Stability Assist Module Diagnostic Trouble Code (DTC) Index
- Stability Assist Calibration List
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: No Communication With The Stability Assist Module
- PINPOINT TEST B: DTCs B1317, B1318 - BATTERY VOLTAGE HIGH/LOW
- Pinpoint Test C: DTC C1095, C1096- Hydraulic Pump Motor Circuit Failure/Open
- Pinpoint Test D: DTC C1145 (RF), DTC C1155 (LF), DTC C1165 (RR), DTC C1175 (LR) - Anti-Lock Brake Sensor Input Circuit Failure
- Pinpoint Test E: DTC C1233 (LF), DTC C1234 (RF), DTC C1235 (RR), DTC C1236 (LR) - Anti-Lock Brake Sensor Input Signal Missing, And DTC C1222 Wheel Speed Mismatch
- Pinpoint Test F: DTC C1277 - Steering Wheel Angle 1 And 2 Circuit Failure, DTC C1278 - Steering Wheel Angle 1 And 2 Circuit Faulted
- Pinpoint Test G: DTC C1279 - Yaw Rate Sensor Circuit Failure, DTC C1280 - Yaw Rate Sensor Signal Fault
- Pinpoint Test H: DTC C1281 - Lateral Accelerometer Circuit Failure, DTC C1282 - Lateral Accelerometer Signal Fault
- Pinpoint Test I: DTC C1285 - Booster Solenoid Circuit Failure
- Pinpoint Test J: DTC C1286-Booster Mechanical Failure
- Pinpoint Test K: DTC C1287 - Booster Pedal Force Switch Circuit Failure
- Pinpoint Test L: DTC C1730 - Reference Voltage Out Of Range (+5 V)
- Pinpoint Test M: DTC C1960 - Driver Brake Apply Circuit Fault
- Pinpoint Test N: The Yellow Abs Warning Indicator Does Not Self-Check
- Pinpoint Test O: DTC C1103 Hydraulic Brake Pressure Switch Circuit Failure
- Pinpoint Test P: DTC C1115, C1185-Abs Power Relay Output Short To Battery/Circuit Failure
- Pinpoint Test Q: DTC C1184 Abs System Time-Out
- Pinpoint Test R: DTC C1194, C1198, C1210, C1214, C1242, C1246, C1250, C1254, C1404, C1410, C1957, C1958 Isolation Valve/Dump Valve Coil Circuit Failure
- Pinpoint Test S: DTC C1288 Pressure Transducer Main/Primary Input Circuit Failure
- Pinpoint Test T: DTC C1446 Brake Switch Circuit Failure
- Removal And Installation