Oil Pan: Removal

WARNING: This page is about a different car, the 2003 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

Remove the catalytic converter. For additional information, refer to EXHAUST SYSTEM .
Drain the engine.
Remove the oil pan retaining bolts.

Fig 1: Removing Oil Pan Retaining Bolts
Courtesy of FORD MOTOR CO.

CAUTION: To prevent damage to the sealing surface, only use the special tool shown to remove the oil pan.

NOTE: Tighten the locknut against the oil pan and tap the special tool several time to release the oil pan from the lower crankcase.

Fig 2: Removing Oil Pan

Courtesy of FORD MOTOR CO.

Using the special tool, remove the oil pan.