Valve Seals: Removal

WARNING: This page is about a different car, the 2003 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

Remove the camshafts.
- Take out the valve tappets and place to one side in sequence.

WARNING: Always wear protective goggles when working with compressed air. Failure to do so may result in personal injury.

Fig 1: Attaching Special Tool

Courtesy of FORD MOTOR CO.

Unscrew the spark plugs from the first cylinder and attach the special tool.

CAUTION: Air pressure is between seven and ten bar.

Attach the special tools and apply compressed air to the cylinder.
1. Compress the valve spring.
2. Take out the valve collets.
- Take out the valve spring retainer and the valve spring.
  
  Fig 2: Removing Valve Spring
  Courtesy of FORD MOTOR CO.
Remove the valve stem oil seal.
1. Insert the special tool.
2. Turn the special tool clockwise and pull out.
  
  Fig 3: Removing Valve Stem Oil Seal
  Courtesy of FORD MOTOR CO.