April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensor - Front Anti-Lock Brake: Removal

Disconnect the battery ground cable (14301).

Fig 1: Disconnecting Battery Ground Cable
Courtesy of FORD MOTOR CO.

NOTE: For right hand side access, remove the windshield washer pump and reservoir; refer to WASHER PUMP & RESERVOIR .

Disconnect the front anti-lock brake sensor electrical connector.
1. Peel back the foam insulation.
  
  Fig 2: Disconnecting Front Anti-Lock Brake Sensor Electrical Connector
  Courtesy of FORD MOTOR CO.
2. Disconnect the front anti-lock brake sensor electrical connector.
Remove the wheel and tire assembly.
1. Remove the four lug nuts.
  
  Fig 3: Removing Wheel And Tire Assembly
  Courtesy of FORD MOTOR CO.
2. Remove the wheel and tire assembly.
Remove the upper sensor cable bracket.
1. Remove the bolt.
  
  Fig 4: Removing Upper Sensor Cable Bracket
  Courtesy of FORD MOTOR CO.
2. Remove the bracket and cable assembly.
Remove the grommet and pull the sensor cable through the opening.
Remove the front anti-lock brake sensor.
1. Remove the anti-lock cable clamp bolt.
  
  Fig 5: Removing Front Anti-Lock Brake Sensor
  Courtesy of FORD MOTOR CO.
2. Remove the anti-lock cable clamp.
3. Remove the two bolts.
4. Remove the front anti-lock brake sensor.