LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> ZX2 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1224 (Front Disc Brake System) >> Removal And Installation >> Front Brake Pads >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Brake Pads: Installation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Do not allow grease, oil, brake fluid or other contaminants to contact the pad lining material. Do not install contaminated pads.
    NOTE: One brake disc pad kit contains the pads required for both sides.
  1. Install the new spring clips and the brake pads.
    2. NOTE: Use a suitable tool to protect pistons and boots when pushing the caliper pistons into the bores.
  2. Compress the disc brake caliper pistons into the caliper piston bores.
    3. CAUTION: Tighten the bottom locator pin brake caliper bolt before tightening the top guide pin brake caliper bolt.
  3. Position the brake caliper and install the 2 bolts.
    • Tighten to 32 Nm (24 lb-ft).
  4. Fill the brake master cylinder reservoir with clean brake fluid.
  5. Test the brakes for normal operation.
scientia non olet · About LEMON Manuals