Anti-Lock Brake System (ABS)
WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
The anti-lock brake system consists of the following components:
- hydraulic control unit (HCU)
- ABS module
- rear wheel speed sensor
- rear wheel speed sensor ring (integral to the ring gear)
- front wheel speed sensors
- front wheel speed sensor ring (integral to the hub and bearing assembly)
- yellow ABS warning indicator
- brake pressure switch
The front wheel speed sensor rings are integral to the front hub and bearing assemblies. For additional information, refer to FRONT SUSPENSION - 4X2 or FRONT SUSPENSION - 4X4 .
The rear wheel speed sensor ring is integral to the ring gear. For additional information, refer to REAR DRIVE AXLE/DIFFERENTIAL - FORD 8.8-INCH RING GEAR .