LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> ZX2 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 309 (Engine-SVT) >> In-Vehicle Repair >> Valve Seals >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Valve Seals: Installation

WARNING: This page is about a different car, the 2003 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit the valve stem oil seal.
    • Coat the valve stem with engine oil.
    • Cover the valve stem grooves with the valve stem oil seal sleeve.
    • Slide the valve stem oil seals onto the valve stem and take off the valve stem oil seal sleeve.
      Fig 1: Fitting Valve Stem Oil Seal
      G01615586Courtesy of FORD MOTOR CO.
    2. NOTE: Check that the valve collets are correctly seated.
  2. Install the valve springs.
    • Insert the valve springs and valve spring retainer.
    1. Compress the valve springs.
    2. Fit the valve collets.
      Fig 2: Installing Valve Springs
      G01615587Courtesy of FORD MOTOR CO.
    3. NOTE: Do not tighten yet.
  3. Detach special tool 303-363.
  4. Repeat the operations for all the other cylinders.
  5. Coat the valve tappet with engine oil and insert.
  6. Install the camshafts. For additional information, refer to CAMSHAFTS .
scientia non olet · About LEMON Manuals