LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> Crown Victoria Base, 4.6 9 >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Adjustments >> Digital Transmission Range Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Digital Transmission Range Sensor

CAUTION: When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery.
  1. Place transmission in Neutral. Turn rear air suspension switch off, if equipped. Switch is located on left side of trunk. Disconnect battery negative cable. Raise vehicle on hoist.
  2. Disconnect manual shift lever cable and electrical connector from Digital Transmission Range (DTR) sensor. Loosen 2 DTR sensor bolts. Install DTR Sensor Aligner (T97L-70010-A). Tighten DTR sensor bolts to specification. See TORQUE SPECIFICATIONS .
  3. Connect shift lever cable with shift lever in Drive position. Tighten nut to specification. See TORQUE SPECIFICATIONS . Connect DTR sensor electrical connector. Lower vehicle and connect negative battery cable. Turn air suspension switch on, if equipped.
scientia non olet · About LEMON Manuals