LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> Excursion 7.3 F, 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Servicing >> Removal & Installation >> Transmission Range Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmission Range Sensor: Installation

  1. Install TR sensor onto manual control lever shaft. Install 2 retaining bolts, but do not tighten. Place TR sensor in neutral position (2 detent positions back from Park). Adjust TR sensor. See TRANSMISSION RANGE SENSOR  under ADJUSTMENTS. After adjusting TR sensor, tighten retaining bolts to specification. See TORQUE SPECIFICATIONS .
  2. Install manual control lever to TR sensor and tighten nut to specification. See TORQUE SPECIFICATIONS . Connect shift cable to manual control lever. Install harness connector to TR sensor. Lower vehicle and connect negative battery cable. Activate air suspension, if equipped.
scientia non olet · About LEMON Manuals