Torque Converter End Play Check: Assembly

Install the special tool into the torque converter until it bottoms out.
- Tighten the inner post until the tool is securely locked.
Fig 1: Tightening Inner Post Until Tool Is Securely Locked
Courtesy of FORD MOTOR CO.
Install the special tool on the converter impeller housing and zero the dial.

Fig 2: Installing Special Tool On Converter Impeller Housing And Zero Dial
Courtesy of FORD MOTOR CO.
Lift up on the special tool and note the dial indicator reading. If the reading exceeds end play limits, install a new or rebuilt torque converter.

Fig 3: Torque Converter End Play Specification Chart

Courtesy of FORD MOTOR CO.

Fig 4: Lifting Up On Special Tool And Noting Dial Indicator Reading

Courtesy of FORD MOTOR CO.