Battery And Charging System
- Component Location
- Specifications
- Description And Operation
- Diagnosis And Testing
- Charging System
- Notes
- Special Tool(s)
- Battery Positive Output (B+) Circuit 38 (BK/OG)
- I Circuit 904 (LG/RD)
- A Circuit 35 (OG/LB)
- Inspection and Verification
- Powertrain Control Module Diagnostic Trouble Code (DTC) Index
- Symptom Chart
- Connector Circuit Reference
- Pinpoint Tests
- Pinpoint Test A: The Battery is Discharged or Battery Voltage is Low
- Pinpoint Test B: The Charging System Warning Indicator is ON With the Engine Running (The Charging System Voltage Does Not Increase)
- Pinpoint Test C: The Charging System Overcharges (Battery Voltage Is Greater Than 15.5 Volts)
- Pinpoint Test D: The Charging System Warning Indicator is ON with the Engine Running and the Battery Increases Voltage
- Pinpoint Test E: The Charging System Warning Indicator is Off With the Ignition Switch in the ON Position and the Engine Off
- Pinpoint Test F: The Charging System Warning Indicator Flickers or is Intermittent
- Pinpoint Test G: The Generator is Noisy
- Pinpoint Test H: Radio Interference
- Component Tests
- Battery
- Charging System
- General Procedures
- Removal And Installation