Suspension System
- Component Location
- Specifications
- Description And Operation
- Diagnosis And Testing
- Wheels And Tires
- Tire Pressure Monitoring System
- Pinpoint Tests
- Pinpoint Test A: No Communication With The TPMS Module/Unable To Enter Self-Test
- Pinpoint Test B: TPMS Will Not Enter Sensor Training Mode
- Pinpoint Test C: Message Center Displays "WARNING TPMS SYSTEM FAULT"
- Pinpoint Test D: DTC B2849 - Horn Output Relay Circuit Open
- Pinpoint Test E: DTC B2872, B2885 - Tire Pressure Sensor Fault
- Suspension System
- General Procedures
- Removal And Installation
- Wheel And Tire - Front
- Wheel Bearing, Hub, Knuckle, Upper Arm And Lower Arm - Front
- Special Tool(s)
- Removal & Installation
- Notes
- Item 1: Axle-to-Wheel Hub Nut Removal Note
- Item 2: Speed Sensor Harness Removal Note
- Item 5: Brake Caliper, Pads and Anchor Plate Removal Note
- Item 10: Tie-Rod End-to-Wheel Knuckle Nut Removal Note
- Item 11: Lower Ball Joint-to-Wheel knuckle Nut Removal Note
- Item 12: Upper Ball Joint-to-Wheel Knuckle Nut Removal Note
- Item 27: Lower Arm Installation Note
- Item 24: Lower Arm-to-Frame Nut (forward mounting) Installation Note
- Item 21: Shock Absorber-to-Lower Arm Bolt Installation Note
- Item 16: Upper Arm Installation Note
- Item 13: Wheel Knuckle Installation Note
- Shock Absorber And Spring Assembly - Front
- Stabilizer Bar And Link - Front
- Wheel And Tire - Rear
- Special Tool(s)
- Removal & Installation
- Notes
- Item 2: Wheel Nuts Removal Note
- Item 5: Caliper, Pads and Anchor Plate Removal Note
- Item 9: Access Hole Knockout Removal Note
- Item 10: Wheel Stud Removal Note
- Item 10: Wheel Stud Installation Note
- Item 9: Access Hole Knockout Installation Note
- Item 3: Wheel and Tire Installation Note
- Item 2: Wheel Nuts Installation Note
- Wheel Bearing, Hub, Knuckle, Upper Arm And Lower Arm - Rear
- Special Tool(s)
- Removal & Installation
- Notes
- Item 1: Axle Nut Removal Note
- Item 3: Toe Link-to-Wheel Knuckle Bolt Removal Note
- Item 5: Upper Arm-to-Wheel Knuckle Bolt Removal Note
- Item 10: Wheel Hub Removal Note
- Item 13: Wheel Bearing Removal Note
- Item 17: Stabilizer Bar Link-to-Stabilizer Bar Nut and Bushing Removal Note
- Item 26: Upper Arm-to-Frame Bolt (Rearward Mounting) Removal Note
- Item 30: Upper Arm-to-Frame Bolt (Forward Mounting) Installation Note
- Item 26: Upper Arm-to-Frame Bolt (Rearward Mounting) Installation Note
- Item 23: Lower Arm-to-Frame Nut (Forward Mounting) Installation Note
- Item 20: Lower Arm-to-Frame Nut (Rearward Mounting) Installation Note
- Item 18: Shock Absorber-to-Lower Arm Bolt Installation Note
- Shock Absorber And Spring Assembly - Rear
- Stabilizer Bar And Link - Rear
- Tire Pressure Sensor
- Tire Pressure Monitoring System Module
- Disassembly And Assembly